PheeNet, Wireless Mesh Networks, Wifi Mesh networking for Wireless Coverage and Surveillance, Total Solution Provider
Wireless Mesh networks, Wifi Mesh Networking, Wireless Coverage, Wireless Outdoor Bridge, Taiwan, China, Manufacturers WCS-02NH

IEEE802.11abgn 2.4GHz/5GHz 2T2R Dual Radio  Outdoor Wireless Mesh Bridge/AP for Wifi Mesh Networking (Output power: 23dBm, 4 N-type connectors)

*  Please contact sales@pheenet.com.tw to request further info, Case Studies, Reference Cases, Performance Test Reports, etc. 

* Please download performance test reports from the link, 
https://www.dropbox.com/sh/omcnw414l0qzf9n/AACg1I8eI6HRPaKaJuRbVVP5a?dl=0

PheeNet WCS-02NH delivers high-performance Wireless Mesh Network with high capacity. WCS-02NH consists of 2 independent 802.11abgn 2.4GHz/5GHz radios for flexible Wireless Mesh deployment. 

Each radio is capable of providing a maximum output power 23dBm and 300Mbps data rate. Each radio may be configured to operate as a Wifi Access Point (AP) or as a PTP (Point-to-Point) or PTMP (Point to Multiple Point) or full Mesh. A dual-radio architecture separates client access and mesh backbone data while optimizing radio resources for both types of traffic to ensure high throughput and low latency. Integrated with Intelligent Mesh OS, it automatically optimizes traffic routes between each Wireless Mesh node and creates a truly adaptive mesh infrastructure. 

The mesh infrastructure adjusts dynamically to traffic levels and RF signal strength to ensure high availability and optimal performance across multiple hops network; it allows Wifi clients to move between Wireless Mesh in less than 50 milliseconds, maintaining a seamless connection for latency-sensitivity applications, such as video and voice. 

PheeNet Wireless Mesh allows WISP, System Integrator, Industrial Enterprises and Municipalities to establish reliable network connectivity almost anywhere. Intelligent Mesh delivers scalable, reliable networking services, and a multi-radio architecture delivers massive capacity. With PheeNet Wireless Mesh, high quality Wifi Coverage, HD-quality video surveillance, and High-Speed Roaming for In-Vehicle Mobility are easier to be implemented.



Technique scope:
Wireless Mesh network, Wireless Mesh Networking, Mesh Network, Mesh Networks, Mesh Networking, Wireless Mesh, Wifi Mesh networking, wireless coverage network, wireless backhaul, Wireless Outdoor Bridge







Low Latency and High throughput over Multiple Wireless hops
■ Dynamic Expansion Wireless Hot Zones
■ Reliable performance when deploying multiple nodes in bridged or routed environments
■ Bandwidth control module at subscriber level
■ IEEE802.1q Tag VLAN
■ IEEE802.1p VLAN Priority Based QoS

Bridge
■ Layer 2 Switching Learning Technology
■ Store and Forward
■ DHCP Server / Client
■ Multicast / Broadcast Storm Limitation
■ IEEE802.1q Tag VLAN
■ IEEE802.1p VLAN Priority Based QoS
■ Q-in-Q VLAN

Router Mode
■ TCP/IP (IPv4)
■ Static Route / Dynamic Route
■ RIP (Routing Information Protocol) V1 & V2
■ DHCP Server / Client
■ NAT (Network Address Translation)

Comprehensive Security Features
■ IEEE802.1x EAP-MD5 / EAP-TLS / EAP-TTLS
■ WPA / WPA2 PSK / EAP with TKIP / CCMP AES based Encryption
■ Proprietary security algorithm for Mesh / Mobility
■ 64/128/152 bits Dynamic WEP keys
■ Hide ESSID
■ MAC address filtering
■ NAT

Dynamic WAN Interface Configuration
■ Flexible assignments of any wired or wireless interfaces as WAN links to adapt to different network topologies
■ Bandwidth aggregation by logically combining multiple RF links to achieve super trunk mode for high bandwidth deployments
■ Smart traffic load balancing across multiple RF links
■ Configurable Transmit-only and Receive-only mode per RF interface
■ Flexible wireless network distribution system

Advanced Features
■ Wireless Bandwidth Limitation
■ Intelligent Wireless Traffic Control
■ Intelligent Abnormal Reports
■ Against Co-band Interference
■ Proprietary TDD-like duplexing schema

Harsh outdoor environment to keep operation
■ Certified IP68 sturdy water-tight housing
■ Built-in automatic thermal sensor and regulator module to facilitate deployment in cold regions

System Management
■ HTTP(s) WEB GUI
■ Telnet
■ SSH
■ Console(optional interface)
■ CLI commands
■ SNMP v1 / v2, standard / private MIBs
■ Syslog
■ Layer 2 iCloud Management Utility
■ Management VLAN Tag
■ NTP Client
■ Firmware upgrade / downgrade via FTP / WEB / SNMP / Layer 2 / Batch process
■ Dual Images
■ Dual Configuration files / Factory Default
■ Ping Watchdog
■ Multiple Level Management

Simple Installation and Deployment
■ Software Alignment / Deployment Tools
■ Access Points Site Survey



 Performance

 Wireless to Wire

TCP: 
Up to 180Mbps for one radio to Ethernet
Up to 320Mbps for multiple radios to Ethernet
UDP:
Up to 240Mbps for one radio to Ethernet
Up to 350Mbps for multiple radios to Ethernet
PPS:
>= 20000@short packet for one radio to Ethernet
>=28000@short packet for multiple radios to Ethernet
Latency:<5ms

 Multiple Hopping

2 hops: up to 160Mbps
3 hops: up to 150Mbps
4 hops: up to 140Mbps
Up to 10 hops with more than 120Mbps throughput
Configuration Max. Hop Counts (default 20hops)
PPS: >=20000@short packet at multiple hops
Latency: <10ms

 RF / Wireless

 Number of Radio Interfaces

Dual 2x2 MIMO radios

 Standard

IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n, IEEE802.3at

 Frequency Range

USA: 2.400 ~ 2.483GHz, 5.15~5.35GHz, 5.5~5.7GHz, 5.725~5.825GHz
Europe: 2.400 ~ 2.483GHz, 5.15~5.35GHz, 5.47~5.725GHz
Japan: 2.400 ~ 2.497GHz, 5.15~5.35GHz, 5.47~5.725GHz
China: 2.400 ~ 2.483GHz, 5.725~5.85GHz

 Modulation

OFDM

 Security

64/128/152-bit WEP
WPA/WPA2 PSK/EAP with TKIP/CCMP AES based Encryption
IEEE802.1x EAP-MD5/EAP-TLS/EAP-TTLS
Hide SSID
MAC Address ACL

 Receive Sensitivity

IEEE802.11a:
-82dBm@6M, 1Rx
-95/-91dBm@6M, 2Rx
-65dBm@54M, 1Rx
-79/-75dBm@54M, 2Rx
 
IEEE802.11b:
-82dBm@1M, 1Rx
-92/-88dBm@1M, 2Rx
-76dBm@11M, 1Rx
-92/-88dBm@11M, 2Rx
 
IEEE802.11g:
-82dBm@6M, 1Rx
-95/-91dBm@6M, 2Rx
-65dBm@54M, 1Rx
-80/-76dBm@54M, 2Rx
 
IEEE802.11a/n HT20:
-82dBm@MCS0, 1Rx
-95/-91dBm@MCS0, 2Rx
-64dBm@MCS7, 1Rx
-77/-73dBm@MCS7, 2Rx
 
IEEE802.11a/n HT40:
-79dBm@MCS0, 1Rx
-91/-87dBm@MCS0, 2Rx
-61dBm@MCS7, 1Rx
-74/-69dBm@MCS7, 2Rx
 
IEEE802.11g/n HT20:
-82dBm@MCS0, 1Rx
-95/-91dBm@MCS0, 2Rx
-64dBm@MCS7, 1Rx
-77/-73dBm@MCS7, 2Rx
 
IEEE802.11g/n HT40:
-79dBm@MCS0, 1Rx
-92/-88dBm@MCS0, 2Rx
-61dBm@MCS7, 1Rx
-74/-70dBm@MCS7, 2Rx

 Output Power

IEEE802.11a:
24dBm@6M(all)
21dBm@54M(all)
 
IEEE802.11b:
24dBm@1M(all)
24dBm@11M(all)
 
IEEE802.11g:
25dBm@6M(all)
22dBm@54M(all)
 
IEEE802.11a/n HT20:
24dBm@MCS0/8(all)
18dBm@MCS7/15(5180MHz)
17dBm@MCS7/15(5825MHz)
 
IEEE802.11a/n HT40:
22dBm@MCS0/8(all)
17dBm@MCS7/15(5190MHz)
16dBm@MCS7/15(5795MHz)
 
IEEE802.11g/n HT20:
25dBm@MCS0/8(all)
21dBm@MCS7/15(all)
 
IEEE802.11g/n HT40:
24dBm@MCS0/8(all)
20dBm@MCS7/15(all)
16dBm@MCS7/15(all)

 Operating Mode

Access Point
Wireless Station
Access Point (WDS Support)
Wireless Station (WDS Support)
MESH Mode

 Features

IEEE802.11h DFS
WMM QoS
Channel / TX Power / Data Rate / Max Distance Adjustable
Multiple SSID / VLAN tags mapping (up to 16 x SSIDs for each radio)
Wireless Site Survey
Node Information
Current Connected Node Limitation
Client User Isolation
Wireless Bandwidth Limitation

 Management

HTTP(s) WEB GUI
Telnet
SSH
Console (optional interface)
CLI commands
SNMP V2C/V3, standard / private MIBs
Syslog
Management VLAN tag
NTP Client
Firmware upgrade / downgrade
Dual Images
Dual Configuration Files / Factory Default
Multiple Level Management

 Hardware

 Processor

Atheros AR7161 (680MHz)

 RF Chipset

Atheros AR9220 based mini PCI module x 2

 Switch

Atheros AR8035 / Atheros AR8021

 Flash

16MB

 SDRAM

128MB

 Antenna Connector

Four Ntype- female arranged in two pairs to support 802.11n 2x2 MIMO operation

 Ethernet

1 x 10/100/1000Mbps Ethernet with IEEE802.3at POE
Ethernet Link Speed Configurable

 Environment

Operating Temperature: -20℃ ~ 70℃
Storage Temperature: -30℃ ~ 85℃
Humidity: 100%(non condensing)

 Power Supply

48V 1A POE
Support Giga Ethernet Link

 Power Consumption

21.5W

 Waterproof

IP67 rated

 Mounting

Pole mount & Wall mount

 Dimension

220 x 220 x 70 mm

 Weight

2.0KG (3.7KG mount kit included)

 Certificate

FCC,CE

TOP